How long does it take to fill 8ft pool?

about 30-40 min30-40 min to completely fill the pool to the top rim. While filling you will need to get those hoses in place as the water rises to the area the hose ports are it will start to drain out the hoses unless the hoses are attached with the clamps provided to the pump etc.

How much water does a Bestway 8ft pool hold?


Item 8ft Fast Set Pool
Item No 57008
Weight 6.2kg (16.3lb)
Water Capacity 2,300L (608 gal)
Size 8ft x 26″

How long does it take to fill a 10ft easy set pool?

between 3 and 4 hours

Takes a while to fill between 3 and 4 hours. The pump is on the lean side and although it filters the water the filter seems in drastically reduce the flow and can at times choke itself. We added in an ‘intex’ solar heater for the pool, which warms the water by 5 or 6 degrees.

How long does it take to fill a 10 foot Intex pool?

2 – 3 hours

It will take 2 – 3 hours to fill the pool with a hose.

How do you calculate how long it will take to fill a pool?

The length of your pool the average depth of your pool. And of course the flow rate the water pressure you have.

How do I keep my 8ft pool clean?

Quote from the video:
Step number two is to actually add chemicals to your pool and the most common pool chemical to use is actually chlorine chlorine normally comes in tablets.

How full should my Bestway pool be?

What is the maxium filling levels height of the pool? Fill the pool until the water capacity is at 80%. It is recommended to leave some extra space for water displacement for when the pool is in use.

How long does it take to fill a summer waves 10ft pool?

about 2 hrs

We let it fill to the fill line on the inside of the blow up pool ring. It took about 2 hrs in total from start to finish.

See also  How does the Three Gorges Dam affect the environment?

How long does it take to fill a small pool?

The average pool can take 12-24 hours to fill and that is only if you have a few hoses chugging away. When your family is chomping at the bit to dive in, that may as well be an eternity. Forget this plan if you are using well water, you will burn up your pump or leave your home without water for days.

How do you fill a Bestway pool?

Quote from the video:
With the top ring inflated close the valve. You can begin to fill your pool. Once there is some water in the full get in and smooth out the liner work from the center outward.

Will 2 hoses fill a pool faster than 1?

Splitting that into two lines will not likely double the flow rate as there is a pressure drop, but it should increase the total flow rate considerably.

Can I fill my pool with a hose?

You can fill your pool with a hose from the tap, just like you would with city water. But remember that you’ll be moving many thousands of gallons of water through your softener system, so be sure to factor in the cost of salt and the electricity required to pump the water to your pool.

How long do Intex pools take to fill?

Intex Frequently Asked Questions

Answer : No, but if you have a ground cover, you can roll the pool up inside it.
Question : How long does it take to fill the pool with water?
Answer : 2-5 hours, depending on which pool, hose size and water pressure.

Can you use an extension cord with an Intex pool?

Quote from the video:
Most of these pool pumps pull 15 amps 12 to 15 amps will not run on a normal extension cord. So it you plug it on plug it up and it will run.

See also  Can an intense core/abs workout gives you diarrhea?

How often should I change the water in my Intex pool?

Quote from the video:
You'll want to test and adjust your water twice a week but definitely at least once a week you'll also want to shock your water once a week but we'll cover shock in a little bit.

Do Intex pools need chlorine?

For the greatest protection against algae, bacteria, and cloudy water, Intex pools should maintain a chlorine level of 2.0-4.0 ppm at all times.

Should you cover pool every night?

You should cover your pool every night for several reasons. First off, a pool cover saves energy and conserves water by decreasing the amount of make-up water. Also, it reduces the consumption of chemicals, and finally, it saves a lot of cleaning time since it keeps the debris out of the pool.

Do you leave Intex pool pump on?

Quote from the video:
So the short answer is two or three hours a day should really be enough but depending on your circumstances. The answer to this can vary a lot so let's go into a little bit more detail the climate.

How do I keep my 10ft pool clean?

Quote from the video:
So that's the first thing you do is skim your pool with the leak. Skimmer. The pool is pretty clear.

How long should I run my Intex pool pump each day?

8 hours

Overall, the lessons learned today is you should run your pool pump an average 8 hours a day to properly circulate and clean your water. The pump should push your entire pool in gallons in this 8 hour period of time. Residential pool water only needs to be turned over once daily to have proper filtration.

How long does an Intex above ground pool last?

Typically, the much less expensive soft-sided type (Intex/Coleman) above ground pools last 1 – 3 seasons on average. The more traditional metal-walled above ground pools last between 10 – 20 years. The much more expensive true semi-inground extruded aluminum walled pools can last decades.

See also  Why did my pool turn red?

Is Intex the same as Bestway?

Both Intex and Bestway provide quality products. Intex stands out in instructions, variety, and pump quality. Bestway is slightly less expensive and offers steel-walled pools, as well as the vinyl ones. It comes down to what is most important to you.

Can Intex pools stay up all year?

In warmer climates, Intex advises to keep your pool up, if you prefer. However, you must winterize the pool when keeping it full throughout the winter. If your area maintains tropical climates all year long, you may not need to winterize your pool at all, especially if you use your pool on a regular basis.

How often should you change above ground pool water?

once every five to seven years

Generally, pool water needs to be replaced once every five to seven years. This should be done during mild weather so that your pool surface is not at risk from strong sunlight and heat. Your pool maintenance company can recommend when it is time to drain your pool.

How long can water sit in pool without chlorine?

I think the answer to your question is about 3-6 days. The problem is that the chlorine that you need to keep the bacteria in check is used up more quickly as the temperature rises, the activity increases, and as sweat and other body stuff is put into the pool.

How often should I put chlorine in my above ground pool?

Pool Maintenance (Ongoing)

Step 1: Always keep chlorine level in the safe range on your test strip. Test after daily. Run your pool filter at least 6 to 8 hrs every day.
Step 3: Add maintenance dose of algaecide per label instructions weekly.
Step 4: Add 2 oz of Super Clarifier per 5000 gallons of pool water each week.