How tight should toilet flange bolts be?

Re: How tight do you tighten flange bolts? Tight enough so that the toilet doesn’t move around and cause the new wax ring seal to fail and loose enough that the toilet doesn’t break.

How tight should you tighten toilet flange bolts?

You'll want to make sure your bowl doesn't wiggle back and forth. You've got to be careful. Don't over tighten those bolts you don't want to break your porcelain.

How tight should the bolts be for the bottom of a toilet?

Get the bolts snug but not tight. Some tanks have built in lugs that will contact the bowl. If yours has these, stop when they contact the bowl. You can fill the tank and look for leaks at the bolts.

How tight should my toilet be to floor?

I can’t tell you exactly how tight to turn them, but you should not overtighten, or you may crack the toilet. As a rule of thumb, try a turn or two a side until you feel resistance, them try to wiggle the toilet bowl slightly. If there is no significant movement, you are probably tight enough.

How do you tighten a flange bolt?

Quote from the video:
First time around just snug the nuts with a hand wrench. Second time around tighten the nuts firmly with the torque wrench.

How tight should bolts be?

In general, you should make the bolt tight enough so that the items it is holding together stay together, but not so tight that you damage the bolt’s threads. You should tighten bolts properly so that the bolt performs properly.

See also  When was the Olympics held in France?

How do you tighten a toilet anchor bolt?

Quote from the video:
And a pair of vise grips. You will also need your nut and a washer. So the first thing we do is put our washer over top of our bolt. Then we'll start to hand tighten our nut.

What does torquing a bolt mean?

Torque tightening is the accurate application of torque to a nut so that a bolt can hold its load securely without breaking. Too little and our materials aren’t properly tightened – making it structurally unsafe. Too much torque can break the bolt.

What is flange torquing?

It is a twisting or turning force used to move objects including bolts and flywheels. Torque is required to obtain a non-failing connection.

How do you hot bolt a flange?

Quote from the video:
Care is taken to orientate the top and bottom clamp segments. And then degrees to each other it interlocks and keeps a clamp in place.

What is the hot bolting?

Hot bolting is the practice of removing, replacing or freeing and re-tightening bolts and tiedown screws on live piping, wellheads and Xmas trees.

How hot bolting is done?

Hot Bolting: The ASME Definition

The procedure generally consists of removing one bolt at a time in a flange, relubricating it, reinstalling it (or a new bolt), and retightening it to a specified torque. Hot bolting can be performed while the unit is online or once the unit is depressurized”.

What is warm bolting?

What Is Hot Bolting? Hot bolting is a technique of re-tightening or completely replacing the connection bolts which hold together sections of piping. The added difficulty of this procedure is the fact that the pipes are left “live” and in use during this process, which gives rise to the term “hot” bolting.

See also  Where did Peyton Manning live as a child?

Is Hot bolting safe?

The dangers of hot bolting include risk of a severe injury. In many documented accidents where hot bolting failed, there have been fatal casualties, fire, explosion and loss of equipment and plant.