What size of trolling motor do I need?

General rule of thumb: you need at least 2 lbs. of thrust for every 100 lbs. of fully-loaded boat weight (people and gear included). If things like wind or current are major factors where you fish, you’ll want a little extra thrust.

How do I know what size trolling motor I need?

Boat weight is the most important consideration to take into account when choosing a trolling motor. A beginning rule of thumb is that you want a minimum of 2 lbs of thrust for every 100lbs. For example, if you have a 3000lb boat, fully loaded, then the calculation is (3000/100) * 2 = 60lbs of thrust.

How fast will a 55 lb thrust trolling motor go?

Assuming perfect riding conditions, the use of the best fuel i.e. the distillate marine diesel, and moderate load, 55-pound trolling motors are likely to attain a maximum speed of only 5 miles per hour. This would take around two hours for the deep cycle battery charge to get completely depleted.

How fast will a 70 lb thrust trolling motor go?

A 70lb thrust trolling motor will have a speed of about 8 miles/hour or 15 km/hr.

Will a 55 lb thrust trolling motor?

Electric trolling motors are chosen by thrust. Higher pounds of thrust WILL NOT move a boat faster. In fact two 55 pound thrust motors will not move you any faster than one 30 pound thrust motor. Higher thrust 12V trolling motors are designed for bigger heavier boats with larger payloads.

How long will a 24V trolling motor last?

This will give you maximum speed and power and is often necessary on a large boat, or in strong winds. Thus, if you operate your trolling motor at maximum speed, you will typically get about 2 hours of use from a fully charged pair of “average” batteries. Possibly 4 hours of use for the larger extra capacity batteries.

What size battery do I need for a 55 lb thrust trolling motor?

Using a Newport Vessels 55lb thrust motor continuously for two hours at full speed would require a battery with a 100-120 AH rating.

See also  Do bats control mosquito populations?

How far should your trolling motor be in the water?

12

A trolling motor’s ideal propeller should be at a depth that keeps about 6 inches of water above the blades. In other words, the centerline of the motor and the prop shaft should be about 12-18 inches below the waterline, depending on the make, model and dimensions of the trolling motor.

How far can you go with an electric trolling motor?

This electric outboard motor with a built-in battery provides 3 hp equivalent horsepower and can go up to 22 miles at 4.5 mph, or keep running all day long at trolling speed.

How fast will a 36 lb thrust trolling motor go?

around 3 mph

Kayak-specific motors around 36 lb thrust can reach speeds around 3 mph, but larger motors can get up to or even over 5 mph. Either way, it’s not an incredibly large change if a larger motor is purchase. However, if you don’t buy a large enough motor, it might not actually be enough to push your vessel.

Will 2 trolling motors make you go faster?

Two motors in the back will just push the bow a little higher in the air, and the stern will dig in deeper, slowing you down. The boat will be faster with a trolling motor if it’s level in the water.

How do you make a trolling motor go faster?

Make Your Trolling Motor Faster

  1. Make Your Trolling Motor Faster.
  2. Change the Battery.
  3. Reduce the Load of the Canoe.
  4. Fix a more Streamlined Propeller.
  5. Put on Lighter Attire.
  6. Replace the Existing Motor.
  7. Conclusion.


Can you have too much thrust on a trolling motor?

You can never have too much thrust and go with a variable speed. Not only is it more useful it also helps battery life. The one place that many people try to save money is on the electric trolling only to regret it.

How many pounds of thrust is 1hp?

So 1 hp trolling motor basically equals to 70 lbs of thrust, and about 0.6 horsepower is a 55 lb thrust trolling.

See also  How much is a boating license in TN?

What is the highest thrust 12 volt trolling motor?

Trolling motors are offered in 12V, 12/24V, 24V and 36V versions, with the most powerful ones offering more than 100lb. of thrust, powerful enough to move heavy vessels such as pontoon boats. Maximum thrusts at different voltages are approximately 12V/55lb.

What is the highest thrust trolling motor?

Minn Kota

(Provided by Minn Kota)



Minn Kota has introduced the most powerful trolling motor on the market featuring 112 pounds of thrust.

How do you put a trolling motor on a boat?

Quote from the video:
That allows us to be able to put that in and you just put your lift assist cylinder on and that allows you to be able to lift and lower your trolling motor without having it falling in bang.

How fast can a jon boat go with a trolling motor?

A jon boat powered by a trolling motor can go up to 4 to 5 miles per hour, but it’s rare to reach these top speeds. In most cases you can expect a speed between 2 and 3 mph at maximum throttle.

How do you set up a trolling motor?

Quote from the video:
We've got our crossover linking battery cable. And we've got the cable that's gonna go from the breaker to the battery. Now we're just gonna connect. Everything.

Do I need a circuit breaker on my trolling motor?

It is highly recommended that a circuit breaker or fuse be used when installing a trolling motor. Refer to the Minn Kota “Conductor Gauge and Circuit Breaker Sizing Table”. For motors requiring a 60-amp breaker, the Minn Kota MKR-19 60-amp circuit breaker is recommended.

How much does it cost to install a trolling motor?

It depends a lot on the trolling motor you want. The 80 Ulterra Minnkota is around $2300, The simpler Ipilot model around $1400 with manual motors less by a couple more hundred.

See also  Popping shoulders

Where should you mount a trolling motor?

The trolling motor should be placed as close to the center of the stern as possible without interfering with the operation of the main motor, if there is one. The top of the mounting bracket should be flush with the top of the stern.

What side of the boat does the trolling motor go on?

Decide which side of the bow – port or starboard – you want to mount the motor. There’s no “wrong” answer for this as it really depends on how you operate the boat and how you fish. If you usually steer the boat from the port side, you’ll want to consider mounting the motor on the starboard side to improve visibility.

How long does it take to install a trolling motor?

Total man hours spent on the install was 14 hours ($1,900), with another 4 hours ($540) on the custom starboard, plus wiring, screws and other installation bits and pieces “I would plan on about a week of time to do the install, give or take, actual time on the boat may be less may be more,” Held said of the process, …

Which way does a trolling motor face?

The prop of the trolling motor should turn in the direction that allows the blade to pull the water in front of it. Generally, a trolling motor prop will turn in a counter-clockwise rotation. This will allow the prop blades to pull the water through and push the vessel forward.

What would make a trolling motor run backwards?

If it is 180 degrees turned, or if it is on the prop end the motor will run backwards.

How do you turn on a trolling motor?

Quote from the video:
So in the head here you take out the screws from underneath. And then once you get into it what I've noticed.